Recherche

SPSLux offers a wider range of correction types to support all rovers and geodetic applications. Please find below a description of the supported correction types, along with available message type(s). Correction Type Message Type Correction Description DGNSS RTCM 2...

Suivant l'article 2. i) de la loi du 25 juillet 2002 portant réorganisation de l'administration du cadastre et de la topographie (ACT), l'administration a dans ses attributions "l'établissement, la densification et la conservation des réseaux géodésiques...

This user guide leads you through the essential steps of the SPSLux subscription process and GNSS receiver configuration for accessing SPSLux services. More in-depth information on available mountpoints, the national coordinate system and the SPSLux GNSS reference stations can...

NTRIP (Network TRansport of RTCM data over IP) is an international accepted protocol for broadcasting GNSS correction data in RTCM format via internet. The NTRIP caster takes data from one or more data stream sources and provides it to one...

The SPSLux stations receive GNSS satellite data round-the-clock and send it to the authority’s data center for further processing and analysis. The network includes 12 continuously operating reference stations, although some of them are on international territory...

L’administration du cadastre et de la topographique a dans ses attributions l'établissement, la densification et la conservation des réseaux géodésiques nationaux en planimétrie, en altimétrie...

What it is… The department of territorial information of the Luxemburgish cadastre and mapping agency is responsible for managing and maintaining the local satellite positioning reference system, named SPSLux (Satellite Positioning System Luxembourg). SPSLux is a positioning service, that allows...

Troubleshooting when the connection to the NTRIP caster fails: Check if your internet connection is working. Consider whether poor mobile coverage could be the cause of the problem. If you connect to our NTRIP server through mobile telecommunications services, please...

SPSLux offers raw data observations from the national reference stations in form of 24-hour-length files with 1Hz data. Receiver Independent EXchange (RINEX) 2.11 format for GPS and GLONASS observations or RINEX 3.02 format for GPS, GLONASS...

The national GNSS reference stations do not only provide GNSS correction data, but also establish an accurate network in order to realize the national reference system called LURES / LUREF (Luxembourg Reference System / Frame). The station’s coordinates are managed in...